How to Connect Canon mg3600 Printer to Wi-Fi?

When you recently bought a canon mg3600 wifi printing device for office or home use, the first thing you need to do is gently close the box and remove all accessories, and then place the device on the desk. Then collect all the cable that is included with this printing device, and then connect it to your preferred port. Thanks to the automatic WPS connection means a protected Wi-Fi configuration, you can connect your own devices. This allows both the device, computer, and printer to contact each other on their own network without entering a password, and then allows a quick and easy way to connect devices. By hiring a Canon support agency, you can get help because there are licensed and extremely talented technicians operating here.



Approach to configuration Canon PIXMA MG3600

 If your access point has a WPS button, without any doubt choose the "WPS connection method" because this procedure is by far the simplest method of connecting a PIXMA printer. Just take a look at these lines and follow the same instructions as for the guide:

  • First of all, make sure the printer is ON and the WPS button on the router is available.
  • Now press and hold the Wi-Fi button on the printer before the ON light flashes.
  • Now make sure the Wi-Fi lamp flashes quickly and the ON lamp is on. Then visit the entry point and then press the WPS button in a few moments.
  • Then you will notice that the blue Wi-Fi lamp on the printer will flash when hunting, and the power and Wi-Fi lights will flash when connecting to the access point. When the printer is connected to the wireless system, the power and Wi-Fi lights will stop blinking and stay on.
  • In the long run, make sure the Wi-Fi lamp and ON lamp is on.

After completing the above process, the system link installation is now complete. 

 

If the device is not connected, go to another method.

If your access point does not support the WPS attribute, follow the instructions below to set up the printer on a wireless system:

  • Click "Start configuration" when the first screen appears
  • The program will now check the driver for updates. The download will start automatically when it needs to be updated. Wait a few minutes.
  • Select area and status and click "Next"
  • If you want to participate in this extended survey program, click "I Agree", click "I Disagree".
  • Click "Next" to allow everyone "Wizard installation procedure".
  • Make sure the printer is on and then press "Next".
  • Make sure that the "Cannot find a printer in the list" option is selected, and then tap "Next".
  • The installation guide begins, all you want to do is follow the on-screen instructions carefully.
  • Wait a moment for the installation to detect the printer.
  • After the installation is finished, click "Next".
  • And click "Exit".